Desk phones
Add a desk phone by its MAC address, give it a link, and it configures itself: its number, its name, the time zone and its busy-lamp keys.
1Which phones
Yealink, Poly (Polycom), Grandstream, Cisco (SPA and 6800), Fanvil and Snom phones are supported. Other SIP phones can still be set up by hand with the extension’s details (Admin → People → Team).
2Adding one
- Add the phoneOpen Admin → Phone system → Desk phones, choose Add a desk phone, and enter the MAC address printed on the phone’s label, the brand, and which extension it is.
- Choose its keysAdd busy lamps (a light that shows a colleague is on a call) and speed dials. Give Grandstream keys on the phone itself.
- Give it the linkOpen the phone’s web page, find its auto-provision settings, paste the link as the server address and press Autoprovision Now. Or set DHCP option 66 on your network to the link so new phones find it themselves.
3Restart and re-sync
On the phone’s row, Update settings tells a registered phone to fetch its settings again, and Restart reboots it. A phone that is not signed in cannot be reached: restart it by hand.
4Encrypted calling
Choose TLS as the connection. The phone then connects to Cadence Talk over an encrypted line and its call audio is encrypted too (SRTP). Phones outside your office network must use TLS: it is the only connection Cadence Talk accepts from the internet. Each phone registers as its extension in your workspace and connects through Cadence Talk's phone server, sip.cadencetalk.com, port 5061.
Yealink phones can set themselves up. When Yealink RPS is switched on for the server, a Yealink you add here is registered with Yealink's set-up service, so a new phone configures itself the first time it is plugged in. The phone list shows whether Yealink accepted it. It needs current Yealink firmware; if the phone asks for an RPS PIN on first start, get it from your Yealink portal. Enter the phone's serial number (on the label under the barcode): Yealink needs it. If Yealink gives the phone an RPS PIN, the phone list shows it. A phone that another company registered must be released by Yealink first. Other brands still use their set-up link.
5Shared phones (hot desking)
Tick Shared phone on a phone, and people log in to it from Settings → Devices & audio → Shared desk phones. The phone becomes their extension, with their calls, until they log out. People can only be on one shared phone at a time, and an administrator can log anyone out. Phones left logged in are logged out after a number of hours your Cadence Talk contact sets (14 by default).
6Keeping track
The list shows when each phone last fetched its settings and from where. A phone that says Not yet has never reached Cadence Talk: check the link and its network. Change a phone’s extension or keys here and it follows the next time it updates (restart it to update at once).
More than one phone can share an extension, such as a desk phone and the softphone. They ring together.